service

11.png

Purchase raw materials according to different tree species, specifications and sizes. 

The wood shall have no woodworm, no mildew and rot as well as no darkening.


22.png

The density of stacking shall be determined in accordance with different specifications and wood moisture. 

Drying time and temperature shall be determined in accordance with different wood types and different humidity. 

Wood must not leave the drying room until they are dried to 12 degrees or below.


33.png

Raw material process :Cutting _ >Fine planning _ > Break

Raw material inspection must adopt full inspection. 

The obligatory measurement items of semi-manufactured products 

Surface : The surface shall be even and smooth, burr-free and fracture-free. 

Size :The size shall be conform to the client’s final confirmatory sample ( or drawing ) .


44.png

Painting process :Polishing _ > Primer spray _ > Polishing _ >Oil spraying 

The purchased paint must be sent to the authoritative quality inspection institution for toxicity-free test before using. 

(See Annex: Test report of Shanghai Idi- Cymical Technology Service Co., Ltd. 【ITS 】or P.R.C. Yangzhou import and export toy inspection institute ) 

Painting standard : 

Painting surface :The radiance must conform to the client’s requirement with even and smooth surface, no fading and no scratching. 

Painting color : Accurate color, the color shall conform to the client’s final confirmatory sample .and there shall be no color difference among the same batch.


55.png

Raw material process :Cutting _ >fine planning_ > break 

Raw material inspection must adopt full inspection.

The obligatory measurement items of semi-manufactured products 

Surface : The surface shall be even and smooth, burr-free and fracture-free. 

Size :The size shall conform to the client’s final confirmatory sample( or drawing ).


66.png

Finished products shall receive full inspection of quality control department.

Testing item

Surface :The surface shall be even, smooth and burr-free with firm adhesive joining and no fracture. 

Size :The size must conform to the size of the client's final confirmatory sample


77.png

Packing inspection :

Accessories: label, color box and bar code of the added materials must be consistent with the product and in accordance with the contract requirements. 

Quantity :The quantity must be consistent with the quantity of the contract.


88.png

Finished products shall receive spot checking of the factory quality control department before warehousing.


COPYRIGHT © 2017 ZHEJIANG ZONXIE ARTS & CRAFTS CO., LTD.  ICP: TECHNICAL SUPPORT: @JCSW

Top